ZyXEL Communications 642R Series manual IP Routing Policy Setup, 11-2

Prestige 642R Series ADSL Router

	Menu 25 - IP Routing Policy Setup
Policy		Policy
Set #	Name	Set #	Name
------	-----------------	------	-----------------
1	test	7	_______________
2	_______________	8	_______________
3	_______________	9	_______________
4	_______________	10	_______________
5	_______________	11	_______________
6	_______________	12	_______________

Enter Policy Set Number to Configure= 0

Edit Name= N/A

Press ENTER to Confirm or ESC to Cancel:

Figure 11-1 IP Routing Policy Setup

To setup a routing policy, follow the procedures below:

Step 1. Enter 25 in the Main Menu to open Menu 25 – IP Policy Routing Setup.

Step 2. Enter the index of the policy set you wish to configure to open Menu 25.1 - IP Policy Routing Summary.

Menu 25.1 shows the summary of a policy set, including the criteria and the action of a single policy, and whether a policy is active or not. Each policy contains two lines. The former part is the criteria of the incoming packet, and the latter is the action. Between these two parts, the separator ‘’ means the action is taken on criteria matched and the separator ‘=’ means the action is taken on criteria not matched.

11-2 IP Policy Routing