ZyXEL Communications 642R Series manual System Status, 10-2

Prestige 642R Series ADSL Router

10.1 System Status

The first selection, System Status, gives you information on the status and statistics of the ports, as shown below. System Status is a tool that can be used to monitor your Prestige. Specifically, it gives you information on your ADSL line status, number of packets sent and received.

To get to the System Status, enter number 24 from the Main Menu to go to Menu 24 - System Maintenance. From this menu, select number 1, System Status. There are two commands in Menu 24.1

-System Maintenance - Status. Entering 1 resets the counters and [ESC] takes you back to the previous screen.

The table below describes the fields present in Menu 24.1 - System Maintenance - Status. It should be noted that these fields are READ-ONLY and are meant to be used for diagnostic purposes.

Note: Displaying this screen degrades system performance.

		Menu 24.1 -- System Maintenance – Status
Node-Lnk	Status	TxPkts	RxPkts	Errors	Tx B/s	Rx B/s	Up Time
1-1483	Up	1462	1567	0	222	211	2:15:16
2	N/A	0	0	0	0	0	0:00:00
3	N/A	0	0	0	0	0	0:00:00
4	N/A	0	0	0	0	0	0:00:00
5	N/A	0	0	0	0	0	0:00:00
6	N/A	0	0	0	0	0	0:00:00
7	N/A	0	0	0	0	0	0:00:00
8	N/A	0	0	0	0	0	0:00:00

Ethernet:				WAN:
Status: 100M/Full Duplex	Tx	Pkts:	1583	Line Status: Up
Collisions: 0	Rx	Pkts:	1521	Upstream Speed: 608 kbps
				Downstream Speed: 4000 kbps

CPU Load = 4.25%

Press Command:

COMMANDS: 1-Reset Counters ESC-Exit

Figure 10-2 Menu 24.1 - System Maintenance - Status

The following table describes the fields present in Menu 24.1 - System Maintenance – Status:

10-2 System Maintenance