
Prestige 642R Series ADSL Router
MT
MR
MC
Maximum Throughput
Maximum Reliability
Minimum Cost
Enter a number from 1 to 6 to display Menu 25.1.1 – IP Routing Policy (see the next figure). This menu allows you to configure a policy rule.
| Menu 25.1.1 - IP Routing Policy | ||
Policy Set Name= test |
| ||
Active= Yes |
|
|
|
Criteria: |
|
|
|
IP Protocol | = | 6 |
|
Type of Service= | Normal | Packet length= 40 | |
Precedence | = | 0 | Len Comp= |
Source: |
|
|
|
addr start= 1.1.1.1 | end= 1.1.1.1 | ||
port start= 20 |
| end= 20 | |
Destination: |
|
|
|
addr start= 2.2.2.2 | end= 2.2.2.2 | ||
port start= 20 |
| end= 20 | |
Action= Matched |
|
|
|
Gateway addr | = | 192.168.1.1 | Log= No |
Type of Service= | Max Thruput |
| |
Precedence | = | 0 |
|
Press ENTER to Confirm or ESC to Cancel: | |||
Press Space Bar to Toggle. |
|
|
|
|
|
|
|
| Figure | IP Routing Policy |
| Table | IP Routing Policy |
|
|
|
Field |
| Description |
|
| |
Policy Set Name | This is the name of the policy set assigned in Menu 25 - IP Routing | |
| Policy Setup. |
|
Active | Press [SPACE BAR] to select Yes to activate the policy. | |
|
|
|
Criteria |
|
|
IP Protocol | IP layer 4 protocol, e.g., UDP, TCP, ICMP, etc. | |
|
| |
Type of Service | Prioritize incoming network traffic by choosing from [Don’t Care] / [Normal] / | |
| [Min Delay] / [Max Thruput] / [Max Reliability]. | |
|
| |
Packet Length | Enter the length of incoming packets (in bytes). The operators in the [Len | |
| Comp] (next) apply to packets of this length. | |
Len Comp | Press to choose from [Equal] / [Not Equal] / [Less] / [Greater] / [Less or Equal] / | |
| Greater or Equal]. |
|
|
|
|
| IP Policy Routing |