Prestige 642R Series ADSL Router
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
ENTER here to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Figure 4-3 Menu 11.2 - Remote Node PPP Options
The following table describes the Remote Node PPP Options menu and contains instructions on how to configure the PPP options fields.
Table | Remote Node PPP Options Menu Fields |
|
FIELD | DESCRIPTION | OPTION |
Encapsulation | Select CISCO PPP only when this remote node is a | Standard |
| Cisco machine; otherwise, select Standard PPP. | PPP |
|
| CISCO PPP |
|
|
|
Compression | Turn on/off Stac Compression. The default for this | On or Off |
| field is Off. | (Default=Off) |
|
| |
|
|
|
Once you have completed filling in Menu 11.2 – Remote Node PPP Options, press [Enter] at the message [Press ENTER to Confirm…] to save your configuration, or press [Esc] at any time to cancel.
4.1.5 Remote Node Filter
In Menu 11.1 – Remote Node Profile make sure the Edit Filter Sets field displays Yes by toggling the [spacebar]. Press [ENTER] to access Menu 11.5 – Remote Node Filter.
Use Menu 11.5 – Remote Node Filter to specify the filter set(s) to apply to the incoming and outgoing traffic between this remote node and the Prestige. You can specify up to 4 filter sets separated by commas, eg. 1, 5, 9, 12 in each filter field. For more information on defining the filters, see the Filter Configuration chapter. Note that there are two versions of this menu depending on whether you use PPPoE encapsulation or not. When using PPPoE encapsulation, you can also specify remote nodes called filter sets.
Remote Node Configuration |
