ZyXEL Communications 642R Series manual Ethernet Setup, Field Description Example, Yes/No

Prestige 642R Series ADSL Router

Menu 1 - General Setup

System Name= ?

Location=

Contact Person's Name=

Route IP= Yes

Route IPX= No

Bridge= No

Press ENTER to Confirm or ESC to Cancel:

Figure 2-10 Menu 1 - General Setup

	Table 2-4	General Setup Menu Fields
Field	Description		Example
System Name	Choose a descriptive name for identification purposes. This name can		P642
	be up to 30 alphanumeric characters long. Spaces are not allowed, but
	dashes “-” and underscores "_" are accepted.
Location	Enter the geographic location (up to 31 characters) of your Prestige.		MyHouse
(optional)
Contact Person's	Enter the name (up to 30 characters) of the person in charge of this		JohnDoe
Name (optional)	Prestige.
Protocols:	Press [SPACE BAR] to toggle routing on or off for the individual
	protocols.
Route IP	Set this field to Yes to enable IP routing. You must enable IP routing		Yes/No
	for Internet access.

Route IPX

Bridge

Set this field Yes to enable IPX routing.

Turn on/off bridging for protocols not supported (e.g., SNA) or not turned on in the previous Route fields.

Yes/No

Yes/No

2.11 Ethernet Setup

This section describes how to configure the Ethernet using Menu 3 – Ethernet Setup. From the Main Menu, enter 3 to open Menu 3.

2-10 Hardware Installation & Setup