Prestige 642R Series ADSL Router
Chapter 4
Remote Node Configuration
In this chapter, we discuss the parameters that are protocol independent.
The
A remote node is required for placing calls to a remote gateway. A remote node represents both the remote gateway and the network behind it across a WAN connection. Note that when you use Menu 4 to set up Internet access, you are actually configuring one of the remote nodes.
4.1Remote Node Setup
This section describes the
4.1.1 Remote Node Profile
To configure a remote node, follow these steps:
Step 1. From the Main Menu, select menu option 11 - Remote Node Setup.
Step 2. When Menu 11 appears, as shown in the following figure, enter the number of the remote node that you wish to configure.
Menu 11 - Remote Node Setup
1.ChangeMe (ISP,SUA)
2.________
3.________
4.________
5.________
6.________
7.________
8.________
Enter Node # to Edit:
Figure 4-1 Menu 11 - Remote Node Setup
Remote Node Configuration |
