Prestige 642R Series ADSL Router
======= Debug | Command Listing ======= |
AT | just answer OK |
ATHE | print help |
ATBAx | change baudrate. 1:38.4k, 2:19.2k, 3:9.6k 4:57.6k 5:115.2k |
ATENx,(y) | set BootExtension Debug Flag (y=password) |
ATENx,(y) | set BootExtension Debug Flag (y=password) |
ATSE | show the seed of password generator |
ATTI(h,m,s) | change system time to hour:min:sec or show current time |
ATDA(w,y,m,d) | change system date to week year/month/day or show current date |
ATDS | dump RAS stack |
ATDT | dump Boot Module Common Area |
ATDUx,y | dump memory contents from address x for length y |
ATRBx | display the |
ATRWx | display the |
ATRLx | display the |
ATGO(x) | run program at addr x or boot ZyNOS |
ATGR | boot ZyNOS |
ATGT | run Hardware Test Program |
ATRTw,x,y(,z) | RAM test level w, from address x to y (z iterations) |
ATSH | dump manufacturer related data in ROM |
ATDOx,y | download from address x for length y to PC via XMODEM |
ATUR | upload RAS code to flash ROM |
ATLC | upload RAS configuration file |
|
|
Figure 10-23 Boot module commands
10.12 Time and Date Setting
There is no Real Time Chip (RTC) chip in the Prestige, so we have a software mechanism to get the current time and date from an external server when you power up your Prestige. Menu 24.10 does just that – it allows you to update the time and date settings of your Prestige. The real time is then displayed in the Prestige error logs. If you do not choose a time service protocol that your timeserver will send when the Prestige powers up you can enter the time manually but each time the system is booted, the time & date will be reset to 2000/01/01 00:00:00.
10.12.1How often does the Prestige update the time?
The Prestige updates the time in three instances:
i.On leaving Menu 24.10 after making changes.
ii.When the Prestige boots up and there is a time server configured in Menu 24.9.
iii.The time is also updated at
| System Maintenance |
