Prestige 642R Series ADSL Router
Menu 11.3 - Remote Node Network Layer Options
VPI/VCI
VPI #= 0 |
| Rem LAN Net #= N/A |
VCI #= 35 |
| My WAN Net #= N/A |
IP Options : |
| Hop Count= N/A |
Rem IP Addr: 0.0.0.0 | Tick Count= N/A | |
Rem Subnet | Mask= 0.0.0.0 | W/D Spoofing(min)= N/A |
My WAN Addr= 0.0.0.0 | SAP/RIP Timeout(min)= N/A | |
Single User Account= Yes | ||
Metric= 2 |
|
|
Private= No |
| Bridge Options: |
RIP Direction= None | ||
Version= |
| Ethernet Addr Timeout(min)= N/A |
Multicast= | None |
|
IP Policies=
Enter here to CONFIRM or ESC to CANCEL:
Only one set of VPI and VCI numbers need be specified as for
PPPor PPPoE encapsulation. One VC may carry different protocols.
Figure 5-3 Menu 11.3 for LLC-based Multiplexing
In this case, only one set of VPI and VCI numbers need be specified for all protocols. The valid range for the VPI is 0 to 255 and for the VCI is 32 to 65535 (1 to 31 is reserved for local management of ATM traffic).
The following diagram explains the sample IP addresses to help you understand the field of My Wan Addr in Menu 11.3. Refer to the following figure for a brief review of what a WAN IP is. My WAN Addr indicates the local Prestige WAN IP while Rem IP Addr indicates the peer WAN IP.
Remote Node TCP/IP Configuration |
