Prestige 642R Series ADSL Router

 

Table 3-5

Internet Access Setup Menu Fields

 

Field

 

Description

Options/E.G.

 

 

 

ISP’s Name

Enter the name of your Internet Service Provider, e.g., myISP.

e.g., MyISP

 

This information is for identification purposes only.

 

 

 

 

Encapsulation

Press [SPACE BAR] to select the method of encapsulation

PPPoE, PPP,

 

used by your ISP.

 

RFC 1483 or

 

 

 

ENET ENCAP.

Multiplexing

Press [SPACE BAR] to select the method of multiplexing used

VC-based LLC-

 

by your ISP - either VC-basedor LLC-based.

based

Service Name

This is valid only when you have chosen PPPoE

poellc

 

encapsulation. If you are using PPPoE encapsulation, then

 

 

type the name of your PPPoE service here.

 

 

 

 

VPI #

Enter the Virtual Path Identifier (VPI) that the telephone

e.g., 0

 

company gives you.

 

VCI #

Enter the Virtual Channel Identifier (VCI) that the telephone

e.g., 35

 

company gives you.

 

 

 

 

My Login

Enter the login name that your ISP gives you. If you are using

e.g., tarbuck

 

PPPoE encapsulation, then this field must be of the form

 

 

user@domain where domain identifies your ISP.

 

My Password

Enter the password associated with the login name above.

***

 

 

 

Single User Account

Press [SPACE BAR] to enable or disable SUA. Please see

Yes/No

 

the following section for a more detailed discussion on the

 

 

Single User Account feature.

 

 

 

 

IP Address

Press [SPACE BAR] to select Static or Dynamic address

Static /

Assignment

assignment.

 

Dynamic

IP Address

Enter the IP address supplied by your ISP if applicable.

e.g.,

 

 

 

192.168.1.1

ENET ENCAP

Enter the gateway IP address supplied by your ISP if

e.g.,

Gateway

applicable.

 

192.168.1.100

When you have completed this menu, press [ENTER] at the prompt [Press ENTER to Confirm…] to save your configuration, or press [ESC] at any time to cancel.

At this point, if all your settings are correct your Prestige should connect automatically to the Internet. If the connection fails, note the error message that you receive on the screen and take the appropriate troubleshooting steps.

Internet Access

3-13

Page 56
Image 56
ZyXEL Communications 642R Series manual Internet Access Setup Menu Fields, Enet Encap