Initial Setup
Crossover Frequency Setting
When you select S for any of the speaker’s size setting modes, the receiver sends the bass frequencies that were destined for that particu- lar speaker to the subwoofer. This setting determines the frequency that is sent to the subwoofer. If you set all speakers (front, center, and sur- round) to L, you cannot set the crossover frequency (✱✱✱ appears on the display).
1.Press 
and XOVER 100 appears on the display.
2.Press ▲ or ▼ to select the crossover frequency, 100, 150, or 200 Hz.
Low Frequency Effect Attenuator Setting
Dolby Digital audio sources include
1.Press 
until LFEATT 0 appears on the display.
2.Press ▲ or ▼ to select the attenuation level, 0, 10, or ✱✱ dB.
Note: The ✱✱ setting, disables the LFE.
Note: When the C✱ speaker setting is selected, you cannot set the center speaker’s distance.
Low Cut Filter On/Off Setting
This setting turns the low cut filter for the subwoofer on or off. You can- not adjust this setting if the subwoofer on/off is set to OFF.
1.Press 
until LCF ON appears on the display.
2.Press ▲ or ▼ to select ON or OFF.
Speaker Distance Settings
You can program speaker distance settings for optimal sound in your listening area.
1.Press 
until FRT 10ft. appears on the display.
2.Press ▲ or ▼ to enter the distance between the front speakers and your listening area. Each time you press the button, the distance changes 1 foot (between 1 to 30 feet).
3.Press 
until CNT 10ft. appears on the display.
4.Press ▲ or ▼ to enter the distance between the center speaker and your listening area. Each time you press the button, the distance changes 1 foot (between 1 to 30 feet).
5.Press 
until SUR 10ft. appears on the display.
18
