Optimus STAV-3790 Initial Setup, Basic Procedure, Speaker Size Setting, Subwoofer On/Off Setting

31-3046.fm Page 17 Monday, January 29, 2001 12:43 PM

Initial Setup

To obtain the best possible surround sound, you need to set up and adjust your receiver and its components. This is particularly important when you use the (Dolby) sound mode. These are one-time adjust- ments and you need not to repeat (unless you change the configuration of your system).

Basic Procedure

1.Press POWER (RECEIVER POWER) to turn on the receiver.

2.Press RECEIVER located in the center of the remote control to acti- vate remote setup.

3.Press or until the component you want to adjust appears on the display. We recommend that you perform adjustments in the order that they appear on the display when you initially set up the receiver.

4.Press ▲ or ▼ to select the option of the displayed component. The setting is automatically entered.

5.Repeat Steps 3 and 4 to adjust the other components.

Notes:

•When you select S for front speakers, you cannot select L for center or sur- round speakers.

•When you set the front speakers to S, the SUBWF sets to ON.

Speaker Size Setting

1.Press until F.L.--C.L.--S.L.appears on the display.

2.Select the front speaker size using ▲ or ▼. If your speaker systems have a 5-inch or larger cone or if you have not connected a sub- woofer, select L (large). The receiver sends the bass frequencies to the front speakers. If you use smaller speaker systems, select S (small): the receiver sends bass frequencies to the subwoofer.

3.Press to move the cursor to the right and select the center speaker size by pressing ▲ or ▼. Choose L for a 5-inch or larger cone, S for a smaller cone, or ✱ if you did not connect a center speaker. When you select ✱, the center speaker signals are sent to left and right front speakers.

4.Press to move the cursor to the right and select the surround speaker size using ▲ or ▼: L if they are 5-inch or larger, S if they are smaller, or ✱ if you did not connect surround speakers. When you select ✱, the surround speaker signals are sent to the left and right front speakers.

Subwoofer On/Off Setting

Press until SUBWF ON appears on the display and press ▲ or ▼ to turn the subwoofer on or off.

17