31-3046.fm Page 3 Monday, January 29, 2001 12:43 PM

IMPORTANT SAFETY INSTRUCTIONS

This receiver is made and tested to meet exacting safety standards. It meets both UL and FCC requirements.

WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.

CAUTION

!

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-SERVICE- ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

This symbol is intended to alert you to the presence of uninsu- lated dangerous voltage within the product’s enclosure that might be of sufficient magnitude to con- stitute a risk of electric shock. Do not open the product’s case.

This symbol is intended to inform you that important operating and ! maintenance instructions are included in the literature accom-

panying this product.

CAUTION

Power Lines —Locate an outdoor antenna away from power lines.

Nonuse Periods —Unplug the receiver’s power cord when you will not use it for extended periods.

Outdoor Antenna Grounding—If an outside antenna or cable system is connected to the receiver, ground the antenna or cable system so as to provide some protec- tion against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 80, provides information about proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connec- tion to grounding electrodes, and requirements for the grounding electrode. See the example below.

Antenna

Lead-In

Wire

Careful attention is devoted to quality standards in the manufacture of your receiver, and safety is a major factor in its design. However, safety is also your responsibility.

This section lists important information that will help you properly use and enjoy your receiver and accessories. Read all the included safety and operating instructions before using your receiver. Fol- low them closely, and retain them for future reference.

Heed Warnings — Follow all warnings on the product and in the operating instructions.

Cleaning — Unplug this product from the wall outlet before cleaning. Use only a damp cloth for cleaning. Do not use liquid or aerosol cleaners.

Attachments — Do not use attachments/accessories not recommended by the product manufac- turer, as they might create a hazard.

Water and Moisture — Do not use this product near water (for example, near a bathtub, washbowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool).

Accessories — Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. Follow the manufacturer's instructions for mounting, and use a recommended mounting ac- cessory.

Carts — Move the product on a cart carefully. Quick stops, excessive force, and uneven surfaces may cause the product/cart to overturn.

Ventilation — Slots and openings in the cabinet provide ventilation, ensure reli- able operation, and protect from overheating. Do not block or cover these open- ings, and do not place the product on a bed, sofa, rug, or other similar surface. Do not place the product in a built-in bookcase or rack unless it provides proper ven- tilation as specified by the manufacturer.

Power Sources — Operate this product using only the power source indicated on its marking label. If you are not sure of your home's power type, consult your product dealer or local power company.

Polarization — This product is equipped with a polarized AC line plug (a plug having one blade wider than the other). This plug will fit in the power outlet only one way. This is a safety feature. If you cannot insert the plug fully into the outlet, try reversing the plug. If the plug still doesn't fit, con- tact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polar- ized plug. If you need an extension, use a polarized cord.

Power-Cord Protection — Route power-supply cords so they are not likely to be walked on or pinched by items placed on or against them, paying particular attention to cords at plugs, conve- nience receptacles, and the point where they exit from the product.

Lightning — For added protection for this product during a lightning storm, or when it is left unat- tended and unused for long periods of time, unplug it from the wall outlet and disconnect the anten- na or cable system. This will prevent damage to the product due to lightning and power-line surges.

Overloading — Do not overload wall outlets, extension cords, or integral convenience receptacles, as this can result in a risk of fire or electric shock.

Objects and Liquids — Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

Servicing — Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service person- nel.

Damage Requiring Service — Unplug this product from the wall outlet and refer servicing to qual- ified service personnel under the following conditions:

When the power-supply cord or plug is damaged.

If liquid has been spilled or objects have fallen into the product.

If the product has been exposed to rain or water.

If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation.

If the product has been dropped or damaged in any way.

Ground Clamp

 

 

Antenna

 

Discharge Unit

Electric

(NEC Section 810-20)

Service

Grounding Conductors

Equipment

(NEC Section 810-21)

 

Grounding Clamps

 

Power Service Grounding

NEC -- National Electrical Code

Electrode System

(NEC Article 250, Part H)

 

• When the product exhibits a distinct change in performance.

Replacement Parts — When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or having the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

Safety Check — Upon completion of service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

Wall or Ceiling Mount — The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

3

Page 3
Image 3
Optimus STAV-3790 owner manual Important Safety Instructions

STAV-3790 specifications

The Optimus STAV-3790 is a cutting-edge robotic platform designed for a variety of applications, ranging from industrial automation to research and development. Engineered for efficiency and versatility, this sophisticated robot incorporates advanced technologies that make it stand out in the competitive landscape of automation tools.

One of the main features of the STAV-3790 is its high-precision navigation system. Utilizing LIDAR technology along with advanced computer vision, the robot can map its environment with remarkable accuracy. This feature allows for seamless movement in complex environments, minimizing the risk of collisions and maximizing operational efficiency. The integration of artificial intelligence algorithms enables the STAV-3790 to learn from its surroundings, adapting to changes in real-time.

The robotic arm of the STAV-3790 is a marvel of engineering. It boasts multiple joints and a high degree of freedom, allowing it to perform a wide range of tasks, from delicate assembly operations to heavy lifting. With a payload capacity that exceeds its competitors, the STAV-3790 can handle various objects, making it ideal for diverse applications in manufacturing and logistics.

Additionally, the STAV-3790 is equipped with an intuitive user interface, allowing operators to program tasks easily and monitor performance in real-time. The onboard control system supports both manual programming and autonomous operation, offering flexibility depending on user requirements. This versatility is enhanced by the robot's ability to connect with other devices and systems within a smart factory environment, facilitating streamlined operations.

Energy efficiency is another hallmark of the STAV-3790. Its advanced power management system optimizes energy consumption, ensuring long operational periods without compromising performance. The robot's design also emphasizes durability, with materials that resist wear and tear, thus extending its lifespan and reducing maintenance costs.

In summary, the Optimus STAV-3790 is a state-of-the-art robotic platform characterized by its high-precision navigation, versatile robotic arm, user-friendly interface, and energy-efficient design. It is primed to meet the demands of modern automation, making it an invaluable asset in various sectors such as manufacturing, logistics, and research. As industries continue to embrace automation, the STAV-3790 represents an impressive blend of advanced technologies and practical application, setting a new standard for robotic solutions.