Optimus STAV-3790 owner manual Dynamic Range Control Setting, Digital Input Setting, Initial Setup

31-3046.fm Page 19 Monday, January 29, 2001 12:43 PM

Initial Setup

Note: When the S✱ speaker setting is selected, you cannot set the surround speaker’s distance.

6.Press ▲ or ▼ to enter the distance between the surround speakers and your listening area. Each time you press the button, distance changes for 1 foot (between 1 to 30 feet).

Dynamic Range Control Setting

In Dolby Digital mode, the dynamic range (how loud and soft sounds are produced) is compressed so you can better hear low-level sound. This setting determines the level of compression. Use the MAX setting for low volume levels, OFF for high volume levels and MID for medium volume levels.

1.Press until DRC OFF appears on the display.

2.Press ▲ or ▼ to select OFF, MAX, or MID.

Note: We suggest you set the speaker level’s when all setup is complete. (See “Adjustment Using Test Tone” on Page 27.)

Digital Input Setting

Use this setting to assign the rear panel digital input jacks to the desired components. (See “Digital Connections” on Page 12.)

1.Press until COAX DVD appears on the display.

2.Press ▲ or ▼ to select the device you connected to rear panel coax digital input, DVD, TV (satellite receiver or TV tuner), CD, MD, VCR, or OFF (no connection).

3.Press until OPT1 CD appears on the display.

4.Press ▲ or ▼ to select the device you connected to rear panel OPT1 digital input, DVD, TV (satellite receiver or TV tuner), CD, MD, VCR, or OFF (no connection).

5.Press until OPT2 CD appears on the display.

6.Press ▲ or ▼ to select the device you connected to rear panel OPT2 digital input, DVD, TV (satellite receiver or TV tuner), CD, MD, VCR, or OFF (no connection).

19