Preparing Your Receiver
Digital Connections
Notes:
•You must remove the DIGITAL IN OPT 1 or 2 jack’s rubber cover in order to connect to either jack.
•Keep the cover in place when you are not using either jack.
You can connect up to three digital output devices to your receiver. Two inputs use the
DIGITAL
IN
PCM/
OPT
1
OPT
2
PCM/
COAX
Note: If you are connecting a LD or DVD player with
DIGITAL | DIGITAL | DIGITAL | |
OUT | OUT | ||
OUT | |||
|
| ||
OPTICAL | COAXIAL | OPTICAL | |
|
|
CD | DVD |
|
| MD | |
|
|
CD Player | DVD | MD Recorder |
Using the appropriate cable, make connections between the digital out- put jack of your device and the digital input jack on the receiver.
The digital input jacks are assigned to the following function at the fac-
tory. For example, when you select the CD function, the jack input activates.
OPT 1: CD player
OPT 2: MD recorder
COAX: DVD player
You can change this arrangement to suit your needs. See “Initial Setup” on Page 17.
12