Preparing Your Receiver
Using One Remote Control for More than One Unit
If you also have an Optimus professional series CD player, VCR, or cas- sette deck with the OSR mark (), you can connect its CONTROL IN jack to the receiver so you can control all of your equipment with a single remote control. You can also use the other component’s remote control by pointing it at the receiver’s front panel.
Note: When you plug the cable into a component’s CONTROL IN jack, that com- ponent’s remote sensor does not func- tion.
CONTROL
1. Connect each component to the receiver as shown in “Connecting |
Program Sources” on Page 9. |
Note: You must connect the audio cables between the receiver and |
the other audio accessory to use your receiver’s remote control to |
control the accessory. |
CONTROL
OUT
IN
2. Connect the cable supplied with the CD player, VCR, or cassette |
OUT
Receiver | Other Component | ||
| with OSR Mark |
|
|
|
|
| |
Remote | To the CONTROL IN jack | ||
Control | of Another Component | ||
| having the OSR Mark |
deck to the receiver’s CONTROL OUT jack and the other component’s |
CONTROL IN jack. |
3.When you want to control more than one other component using the receiver’s remote control,
Installing the
Remote Control’s Batteries
Your remote control requires two AA batteries (not included) for power. For the best operation and longest life, we recommend alkaline batter- ies, available at your local RadioShack store.
| ( |
9 | 9 |
|
(
Cautions:
•Use only fresh batteries of the required size and recommended type.
•Always remove old or weak batteries. Batteries can leak chemicals that can damage electronic circuits.
Note: If the remote’s range is reduced, replace the batteries.
1.Press and slide open the battery compartment cover.
2.Place two fresh AA batteries in the compartment as indicated by the polarity symbols (+ and
3.Replace the battery compartment cover.
15