Using the Remote Control
Receiver/Amplifier Operation
Before operation, press TUNER to select receiver/amplifier operation.
RECEIVER POWER | Turns the |
MUTING | Silences the receiver. Press again to restore the sound to its pre- |
| vious level. |
RECEIVER POWER | TV POWER | |||
|
| POWER |
| TV |
| G |
|
| |
| IN |
|
| FUNC |
T |
|
| ||
U |
| TUNE | ||
M |
| |||
|
| + |
|
|
|
| ENTER |
|
|
|
| – |
|
|
|
| TUNE |
| |
| VOL |
|
| VOL |
|
| CHANNEL |
| |
|
| ASMS |
|
|
| CONTROL MODE | |||
DVD/LD | TV/SAT |
| CD | |
–TUNE +
ENTER
–VOL +
CHANNEL
CLASS
MENU
Number Buttons
DSP MODE
MIDNIGHT
CH SELECT
Receiver/
Tunes to radio stations.
Selects the AM or FM tuner band.
Adjusts the system’s volume.
Tunes to the next higher or lower memory location.
Selects the memory class.
LAllows direct input of the station frequency.
Selects the corresponding memory station. During Direct Access, enter the station’s frequency.
Activates Dolby Digital or Dolby Pro Logic Surround mode when pressed after RECEIVER.
Selects the DSP mode; HALL, JAZZ, DANCE, THEATER 1, or THEATER 2.
Activates the midnight operation mode when pressed after RE-
CEIVER.
Selects the channel to set the speaker sound level when pressed after RECEIVER.
VCR 1 | TV CONTROL | TUNER | |
VCR 2 | RECEIVER | MD/TAPE | |
DSP MODE |
| MIDNIGHT | |
1 | 2 | 3 | 4 |
CH SELECTTEST TONE | ATT | SIG SELECT | |
5 | 6 | 7 | 8 |
CH LEVEL | EFFECT | ||
9 | 0 | +10 | MENU |
|
| CLASS | TV/VCR |
FUNCTION | DIRECT | DIMMER | |
MODE CHECK |
|
| REMOTE |
|
| SET UP | |
Amplifier
TEST TONE
ATT
SIG SELECT
–CH LEVEL +
–EFFECT+
FUNCTION
DIRECT
DIMMER MODE CHECK
Sounds test tones from each speaker when pressed after RE-
CEIVER.
Attenuates (lowers) the signal level when pressed after RECEIV- ER.
Selects the input signal, digital or analog, when pressed after RE-
CEIVER.
Sets the level of the channel selected by CH SELECT when pressed after RECEIVER.
Adjusts the level of DSP mode when pressed after RECEIVER.
Selects a program source (VCR, PHONO, tuner, CD, DVD/TV, or LD/SAT). Repeatedly press until the display shows the desired program source.
Bypasses the receiver’s audio control circuits. Press again to re- store the previous settings.
Dims the display.
Press to show the current operation mode of the remote control. The currently active CONTROL MODE button lights.
29
