
166
Replacing the Lithium Battery
During the initial self test, when the power is turn “On”, the machine will evaluate the condit ion of the back up
battery. If the battery is weak or fully discharged, the following message will be shown on the display.
To replace the battery, follow the procedure below:
(see Note 1)
1(1)Turn the Power Switch to the “O” (OFF)
position.
(2)Open the ADF Doo r.
(3)Remove the Battery tog ether with the
Battery Holder.
CAUTION
!
Dispose the Lithium battery properly and
keep it away from small children.
2Replace the Lithium Battery.
(Order No.:CR2032)
CAUTION
!
When replacing the battery make sure to
observe the polarity to avoid damage to
the machine.
3(1)Install the B attery Holder into the machine.
(2)Close the ADF Door.
(3)Turn the Power Switch to the “I” (ON)
position.
4If the clock is flashing on the LCD Display, follow the procedure on page 24 to reset the clock.
1. The service life of the battery is approximately 1 year when the machine is turned “Off”.
REPLACE BATTERY
INFO. CODE=026
3
2
1
2
Troubleshooting
Note: