88
Printing Out Documents
After receiving a document with the Receive To Memory feature, the following message will appear on the display.
To print the document, follow the steps below.
(see Note 1) (see Note 2)
1
2
3
4
5Enter the password to print the documents.
(See Note 1)
Ex:
6
Machine will start to print the documents.
1. If the password has not been set, your machine will not prompt you to enter the password.
The documents will be printed immediately after pressing in step 4.
2. Once the RCV TO MEMORY feature is set to "On", the password cannot be changed (Fax Parameter No. 37 will
not be shown on the LCD display). If you wish to change th e pas sword, set RC V TO MEMO RY featu re to “Of f” first .
Then change the password. (See page 87)
MESSAGE IN MEMORY
< RCV TO MEMORY >
FUNCTION 8SELECT MODE (1-5)
ENTER NO. OR
5SET RCV TO MEMORY=ON
1:OFF 2:ON 3:PRINT
3RCV TO MEMORY=PRINT
1:OFF 2:ON 3:PRINT
SET INPUT PASSWORD
❚❚❚❚
1234
INPUT PASSWORD
1234
SET * PRINTING *
MEMORY RCVD DOC
SET

Receive To Memory

Note: