79
LSQT1040

Menus

Others
∫[DISPLAY]
≥ OFF ≥ ON
The screen indications are selected as shown
in the illustration below.
∫[ BEEP SOUND]
≥ OFF ≥ ON
This allows operations such as starting and
ending recording to be signaled by a beep.
When [OFF] is set, no beep is heard when an
operation such as recording is started or
ended.
1 Beep
When you start recording
When you turn on the power
2 Beeps
When you pause recording
When you turn off the power
2 Beeps for 4 times
When an error occurs e.g. recording not
starting. Check the sentence displayed on the
screen. (l82)
∫[ POWER SAVE]
≥ OFF ≥ 5 MINUTES
[OFF]: The power saving function is not
activated.
[5 MINUTES]:
When about 5 minutes passed without
any operation, this unit automatically
turns off to prevent the battery from
running down. When you use this unit,
turn it on again.
≥When using the AC adaptor, the unit will not
turn off even if you set this to [5 MINUTES].
∫[ INITIAL SET]
≥ YES ≥ NO
When there is a menu that cannot be selected
depending on a combination of functions, set to
[YES] for changing the menu settings back to
the initial shipping condition.
(Language setting cannot be back to the initial
shipping condition.)
∫[ DEMO MODE]
≥ OFF ≥ ON
This item is used to start the unit
demonstration.
(Only when using the AC adaptor and the mode
dial is at the position)
If you set this to [ON] without inserting a disc,
this unit is automatically set to the
demonstration mode for introducing its
functions. If any button is pressed or operated,
the demonstration mode is canceled. If no
operations take place for approx. 10 minutes,
the demonstration mode automatically starts.
To terminate the demonstration mode, insert a
disc, or set this to [OFF]. For no rmal use, set
this function to [OFF].
Setup menu
OFF
ON
;
3:30 PM
12.15.2006
;
R 0h00m
0h00m00s
3:30 PM
12.15.2006
EIS
SP
DEMO
D105(P)eng.book 79 ページ ２００６年１月１６日　月曜日　午後４時１分