Introduction and Installation
2 Attach the mounting bracket to the wall using the wood screws (3.8 mm x 20 mm, 1/8'' x 13/16'').
L Before drilling, see page 7 for installation location.
Mounting bracket
83.5 mm (35/16")
Wood screws
Wall
3 Connect the wires that connect to the monitor station to the terminal connector by unscrewing the screws, pushing in the wires, then tightly fastening the screws.
L See page 8 for the wire type and distance.
L You can change the camera angle using the camera angle control lever. See page 7 for details.
Terminal connector | Camera angle control lever |
(Non polar) |
|
Screw |
|
Wire (Not included)
10
