Important Information
Additional safety information
1.Use only the power source marked on the unit. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
2.Use only the specified AC adaptor.
3.Do not tamper with the plug.
4.Make sure the plug is securely inserted.
5.Do not touch the plug with wet hands.
6.Do not place objects on the power cord. Install the unit where no one can step or trip on the cord.
7.To reduce the risk of electric shock, do not disassemble this unit. Take the unit to an authorized service center when service is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the unit is subsequently used.
8.Unplug the monitor station from power outlets and refer servicing to an authorized service center when the following conditions occur:
A.If smoke rises, or an unaccustomed noise or smell is discharged from the unit.
B.If metal objects have been dropped inside the monitor station.
9.Do not put your ear(s) near the speaker, as loud sounds emitted from the speaker may cause hearing impairment.
10.Only a qualified technician is allowed to connect a power cable to the unit. Contact an authorized service center.
11.Do not make any wiring connections when the power supply is turned on.
12.Never install wiring during a lightning storm.
13.When existing chime wires are used, it is possible that they contain AC voltage. Electric shock or unit damage could result. Contact an authorized service center.
14.Be sure to install the unit as specified to endure the mass.
15.If the wiring is outdoors, use a protection tube or a surge protector.
16.If the wiring is underground, do not make any connections underground.
17.WARNING – Unplug the monitor station from power outlets if it emits smoke, an abnormal smell or makes unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorized service center.
For best performance
L If a power failure occurs, the unit will not function.
4
