Powering ON/OFF
Turning On the Projector
(3) 
| (2) |
|
1111 | Complete peripheral connections (with a |
|
| computer, VCR, etc.) before turning on the | 06 |
| projector. | |
2222 | Connect the projector’s AC power cord into an |
|
| AC outlet. The <POWER> indicator lights red. |
|
| Open the lens cap. |
|
3333 | Press the |
|
| panel or the <ON> button on the remote control. |
|
| The <POWER> indicator lights green and the | The preparation display will disappear |
| cooling fans start to operate. The preparation | |
| after 30 seconds. | |
| display appears on the screen and the count | |
| Selected Input Source and Lamp power | |
| down starts. | |
4444 | After the countdown, the input source that was | Lamp power status |
| selected the last time and the lamp power status |
|
icon appear on the screen.
5555 If there is no signal input when start on the projector, or the current signal is missed while operating the projector, the Video/Computer
selection window will be displayed on the screen, Video/Computer selection please move the pointer to input source desired
by pressing the ▲▼ and the <SELECT> button. And then follow the input signal guidance window to correct the signal and connection.
If the projector is locked with a PIN code, PIN code input dialog box will appear. Enter the PIN code as instructed on the next page.
Note
zzWhen the [Logo select] function is set to [Off], the logo will not be shown on the screen (Æpage 58).
zzWhen [Countdown off] or [Off] is selected in the [Display] function, the preparation display will not be shown on the screen (Æpage 57).
zzWhen the [Input search] function is set to [On 2], the input signal will be searched automatically (Æpage 56).
zzWhen the [Direct on] function is set to [On], the projector will be turned on automatically by connecting the AC power cord to an AC outlet.
Basic Operation
ENGLISH - 31