Input menu
Select [Input] from the Main Menu (see “Navigating through the menu” on page 40), then select the item from the
Remote Control | Control Panel |
Computer 1: RGB/Component /RGB (Scart)
1111Press ▲▼ to select [Computer 1].
2222Press ► to access the submenu.
3333Press ▲▼ to select RGB, Component or RGB(Scart).
4444Press the <SELECT> button.
| There is no signal input from the computer. |
- - - - | |
| Check the connection between your |
| |
| computer and the projector. |
| The preset system is manually adjusted in |
Mode 1 | |
| the PC adjust Menu. The adjusted data can |
| |
| be stored in Mode |
| PC Systems provided in this projector is |
SVGA 1 | |
| chosen. The projector chooses a proper |
| |
| system provided in the projector and |
| displays it. |
* Mode 1 and SVGA 1 are examples.
1111Press ▲▼ to select [System].
2222Press ► or the <SELECT> button to access the submenu.
3333 Press ▲▼ to select the desired system.
HDMI
Press ▲▼to select [HDMI] and then press the <SELECT> button.
|
| Video | |
Computer 2: RGB | |||
| Press ▲▼ to select [Video] and then | ||
Press ▲▼ to select [Computer 2 (RGB)] |
| ||
| press the <SELECT> button. | ||
and then press the <SELECT> button. |
|
|
Settings
JJComputer System Selection
This projector automatically tunes to various types of computers with its
AUTO When the projector can not recognize the connected signal conforming to the provided PC Systems, Auto is displayed on the System Menu box and the Auto PC adjustment function works to display proper images. If the image is not projected properly, a manual adjustment is required.
Press ▲▼ to select
JJVideo System Selection
Video or
Auto
The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. When Video System is
ENGLISH - 43