About Your Projector
Remote control
| (3) | |
| (2) | |
(4) | (1) | |
(5) | (13) | |
(6) | (12) | |
(11)* | ||
| ||
(7) |
| |
(8) | (10) |
(9)
*Center part is <SELECT> Button. Outer part is <MOUSE POINTER> Button.
(1)
Turn the projector off (Æpage 33).
(2)Signal Emission indicator
Light red while a signal is being sent from the remote control to the projector.
(3)Remote control signal emitter
(4)<ON> Button
Turn the projector on (Æpage 31).
(5)<AUTO SET/CANCEL> Button
Execute the setting of Auto setup in the setting
menu (Æpage 56).
Cancel the playing of the memory viewer function. (Refer to "Operating Instructions - Network operations").
(6)<MENU> button
Open or close the
(7)▲▼◄►
_ Navigate the MENU display.
_ Adjust the volume level or mute the sound.
(8)
Act as the left mouse button for wireless mouse operation (Æpage 37).
(9)Number Buttons
Act as number buttons. Use these buttons when
setting the remote control codes (Æpage 24) or entering the PIN code numbers (Æpage 32).
(10)
Act as the right mouse button for wireless mouse operation (Æpage 37).
(11)<MOUSE POINTER> Button
Move a pointer of the projector or a pointer for wireless mouse operation (Æpage 37).
(12)<INFO.> Button
Operate the information function (Æpage 64).
(13)<IMAGE> Button
Select the image mode (Æpage 36).
Note
zzThe remote control can be used as a wireless mouse for your computer.
zzBefore operating the wireless mouse, connect your computer and the projector with a USB cable (Æpage 37).
zzWhen a USB cable is connected to the computer and the
projector, turn on the projector first, then the computer. zz(8), (10), (11), (15) are available when a USB cable is
connected to the computer and the projector.
Preparation
ENGLISH - 19