Panasonic WJ-FS309, WJ-FS316, WJ-FS409, WJ-FS416 manual Rear View

8
SIGNAL
GND
ALARM/REMOTE
OUT
IN
VIDEO
16 15 14 13 12 11 10 9 8
16 15 14 13 12 11 10 9 8
7654 21
76543
3
21
PLAY IN REC OUT SPOT OUT
DATA CAMERA
SW IN
MULTI
SCREEN OUT
io
u!1
!0
qVideo Input Connectors (VIDEO IN)
These connectors accept a composite video signal
from a camera.
Note: If the input signals have a high jitter content, as in
the case of a VCR playback picture, it may not be
possible to synchronize this unit.
wVideo Output Connectors (VIDEO OUT)
The video signals connected to the Video Input
Connectors (VIDEO IN) are looped through to these
connectors with an automatic 75 Ωtermination.
eAlarm/Remote Control Connector (ALARM/
REMOTE)
This connector accepts the alarm signals from the
associated alarm sensor units and the control signals
from the external system.
rPlayback Input Connector (PLAY IN)
The playback signal from the time lapse VCR is sup-
plied to this connector.
tRecord Output Connector (REC OUT)
The recording signal for the time lapse VCR is provided
via this connector.
yMultiscreen Output Connector (MULTISCREEN OUT)
The video output signal for the multiscreen monitor is
provided via this connector.
uSpot Output Connector (SPOT OUT)
Provides the video output signal for the spot monitor.
iData Port (DATA)
For exchange control data with the WV-CU360 System
Control Unit or a PC within a system.
oCamera Switching Input Connector
(CAMERA SW IN)
The camera switching pulse from the time lapse VCR is
supplied to this connector.
The camera switching interval (Sequential Dwell Time)
can be synchronized with the time lapse mode set in
the associated time lapse VCR.
!0 Signal Ground Terminal (SIGNAL GND)
!1 Power Cord
SIGNAL
GND
ALARM/REMOTE
OUT
IN
VIDEO
987654321
987654321
PLAY IN REC OUT SPOT OUT
DATA CAMERA
SW IN
MULTI
SCREEN OUT
i
u!1
o!0
■Rear View
<WJ-FS309/FS409>
<WJ-FS316/FS416>