69
Step 1
Display the "Preset/Auto" window. (☞ Page 67)
Step 2
Move the cursor onto "Auto mode", and then select
the desired auto function by rotating the jog dial
(inside).
The following 8 auto functions can be selected.
Auto track, auto pan, preset sequence, sort, patrol 1,
patrol 2, patrol 3, patrol 4
Refer to the operating instructions of the camera for
information about each auto function.
Step 3
Move the cursor onto the [Start] button, and then
press the [SET] button.
→ The "Preset/Auto" window will close and the
selected auto function will start.
Step 4
To stop the selected auto function, press the [SET]
button after moving the cursor onto the [Stop] button.
Step 5
To close the "Preset/Auto" window, press the [SET]
button after moving the cursor onto the [Cancel] but-
ton or press the [SETUP/ESC] button on the front
panel.
Auto functions (Auto panning, etc.)
Activate the auto function of the camera according to the settings of the camera.