Panasonic WV-CP284 operating instructions AC 60Hz WV-CP280

The mounting requirements are shown as follows.

Mounting place	Model	Recommended	Number of	Minimum pull-
		screw	screws	out strength
Ceiling	WV-7010A	M8	3 pcs.	196 N {20 kgf}
Wall	WV-831	M8	4 pcs.	921 N {94 kgf}

•When attaching the mount adapter removed from the top of the camera onto the bottom of the camera, do not use screws other than the removed ones. Otherwise, it may cause a malfunction or the camera may fall off.

Recommended tightening torque:

0.39N·m {4 kgf·cm}

Screw hole (1/4-20 UNC)

Camera mounting screws

Mount adapter

v Connect a coaxial cable (optional) to the video output connector.

VIDEO OUT

Connect the video output connector to the monitor or other system device with the procured coaxial cable. The maximum extensible length is shown in the table.

Type of coaxial cable		RG-59/U	RG-6/U	RG-11/U	RG-15/U
		(3C-2V)	(5C-2V)	(7C-2V)	(10C-2V)
Recommended	(m)	250	500	600	800
maximum
cable length	(ft)	825	1 650	1 980	2 640

b Connect the power cord between the camera and the power source.

Important:

•Clamp the coaxial cable and power cable along the camera mount bracket to prevent tangles of the cable.

•120 V AC 60Hz (WV-CP280)

Connect the power cord to an electrical outlet of 120 V AC 60 Hz.

12