Panasonic wv-cp500 Digital noise reduction function setting DNR, Camera Setup screen

Manual fine adjustment of white balance

The white balance is manually fine adjusted after white balance automatically adjustment in the automatic color temperature tracking mode (ATW1, ATW2) or automatic white balance control mode (AWC).

Follow the procedure below.

"CAMERA SETUP" screen		Fine adjustment screen
**CAMERA SETUP**			**ATW1**(1)
SCENE1		R				0
ALC/ELC	ALC			......
SHUTTER	OFF			-	+
AGC	ON(HIGH)	B	...... 0
SENS UP	OFF
WHITE BAL	ATW1		-		+
DNR	HIGH
BW MODE	AUTO1
i-VMD			RET TOP END
RET TOP END

Step 1

Set "WHITE BAL" to "ATW1", "ATW2" or "AWC" and press the setting button.

→The fine adjustment screen appears.

Step 2

Move the cursor to "R" and "B" and use the right or left button to fine adjust the level for each.

When the level indicator moves in the "+" direction, the color becomes deeper, and when the level indicator moves in the "–" direction, the color becomes lighter.

7. Digital noise reduction function setting [DNR]

The digital noise reduction function reduces noise automatically under the condition of low illuminance. The effect level of the noise reduction function is selectable from the following:

LOW: Low level of noise reduction (small residual image).

HIGH (default): High level of noise reduction (large residual image).

8. Black-and-white mode setting [BW MODE]

The settings relating to the black-and-white mode can be configured. Follow the procedure below.

Important:

•When "BW" is set for "ALARM IN", the "EXT" indication will be displayed for "BM MODE" and it is impossible to change the setting. (+ Page 23)

"CAMERA SETUP" screen		"BW MODE" screen
**CAMERA SETUP**		**BW MODE**(1)
SCENE1		AUTO1
ALC/ELC	ALC
SHUTTER	OFF	LEVEL	HIGH
AGC	ON(HIGH)	DURATION TIME	...
SENS UP	OFF		S L
WHITE BAL	ATW1	BURST(BW)	ON
DNR	HIGH
BW MODE	AUTO1
i-VMD		RET TOP END
RET TOP END

14