Panasonic wv-cp500 Setting of scene change detection, Configure frame display

Setting of scene change detection

This function detects a change in the subject state that occurs by covering the camera with a cloth, a cap, or others, or by changing the camera direction largely.

Follow the procedure below.

"CAMERA SETUP" screen			"i-VMD SETUP" screen
	**CAMERA SETUP**		**i-VMD SETUP**(1)
SCENE1			MOTION DET
ALC/ELC		ALC	OBJECT DET	OFF
SHUTTER		OFF	SCENE CHANGE	OFF
AGC		ON(HIGH)	INDICATOR
SENS UP		OFF		OFF
WHITE BAL		ATW1	ALARM	CONT
DNR		HIGH
BW MODE		AUTO1
	i-VMD		RET TOP END
RET TOP END

Step 1

Move the cursor to "i-VMD" and press the setting button.

→The "i-VMD SETUP" screen appears.

Step 2

Move the cursor to "SCENE CHANGE" and select from the following.

ON: Provides an alarm signal when scene change is detected.

OFF (default): Disables scene change detection.

Configure frame display

Follow the procedure below.

"CAMERA SETUP" screen			"i-VMD SETUP" screen
	**CAMERA SETUP**		**i-VMD SETUP**(1)
SCENE1			MOTION DET
ALC/ELC		ALC	OBJECT DET	OFF
SHUTTER		OFF	SCENE CHANGE
				OFF
AGC		ON(HIGH)	INDICATOR	OFF
SENS UP		OFF
WHITE BAL		ATW1	ALARM	CONT
DNR		HIGH
BW MODE		AUTO1
	i-VMD		RET TOP END
RET TOP END

Step 1

Move the cursor to "i-VMD" and press the setting button.

→The "i-VMD SETUP" screen appears.

Step 2

Move the cursor to "INDICATOR" and determine whether or not to display a frame around the screen from the following. OFF (default): Does not display a frame.

ON(ALL): Displays a frame.

ON(OBJ): Display the appearance/disappearance frame only.

20