Panasonic WV-CU161 operating instructions Preface, Features

PREFACE

The WV-CU161 System Controller is designed for one-to-one use with the Combination Camera such as the WV-CS854/WV- CS654/WV-CS604 Combination Camera or the WV-RC100/WV-RC150 Receiver.

Camera control is performed by multiplexing the control signal with the video signal by connecting an AV Codec or the like, or via RS-485 site communication*1.

Alarm signals, such as motion detector signals, can be supplied to external equipment from a built-in alarm output connector. An alarm input connector allows moving the camera to the preset position when an alarm is activated.

The WV-CU161 is capable of downloading preset data from a camera such as the WV-CS854, save it in memory, and upload it to the other combination cameras.

It can also control the camera patrol learning operations, including camera lenses, electronic zoom, auto focus, and pan/tilt heads.

Consult your dealer about camera models suitable for uploading and downloading data. Please also refer to the Operating Instructions of other peripherals.

FEATURES

The WV-CU161 offers the following functions:

Remote control*3 of the camera*2 and the WV-CU161 System Controller, including:

1Pan/Tilt: Slow Pan/Slow Tilt/Auto Pan/Auto Sequence/Auto Sort/Random

2Lens functions: Iris/Focus/Auto Focus/Zoom

3Preset (Selection/Program)/Home/Camera Patrol (Learn/Play/Stop)

4Color/Black and White selection

5Housing: Defroster/Wiper/Auxiliary 1, 2

6External Devices (Power On/Off)

7Alarm (Suspend/Reset)

8Camera setup

Note: The WV-CU161 is not provided with functions to control the audio signal. Audio communication is not possible, regard- less of whether audio boards are installed in the receiver.

*1 Communicate via RS-485 site communication is disabled in a daisy-chain connection.

*2 Controlling the same combination camera from multiple WV-CU161 units installed in different locations is not possible. *3 For remote control functions refer to the Operating Instructions of the combination camera.

4