Panasonic WV-CW244FE, WV-CW240S operating instructions Specifications, Atw

SPECIFICATIONS

Pick-up device:	752 (H) x 582 (V) pixels, Interline transfer CCD
Scanning area:	4.8 (H) x 3.6 (V) mm (Equivalent to 1/3” pick-up tube)
Scanning:	625 lines/50 fields/25 frames
Horizontal:	15.625 kHz
Vertical:	50 Hz
Synchronization:	Internal, Line-lock (only 24 V AC or 220-240 V AC), or Multiplexed vertical drive
	(VD2)
Video output:	1.0 V [P-P] PAL composite 75 Ω/BNC connector
Horizontal resolution:	480 lines
Signal-to-noise ratio:	50 dB (Equivalent to AGC Off, weight On)
Minimum illumination:	1.0 lx (0.1 footcandle) (WIDE),
Detail:	SHARP or SOFT, selectable
White balance:	ATW
Lens Mount:	CS-mount
Lens
Focal length:	3.8 mm - 8 mm
Maximum aperture ratio:	1:1.4 (Wide), 1:1.8 (Tele)
Angular field of view:	Horizontal:	35.6 ° - 73.6 °
	Vertical:	26.6 ° - 53.4 °
Focusing range:	1.2 m - ∞ (3.9 ft - ∞)
Ambient operating temperature:	–10 °C - +50 °C (14 °F - 122 °F)
	–30 °C - +50 °C (–22 °F - 122 °F)
	(When the optional heater unit built in)
Ambient operating humidity:	Less than 90 %
Power source and
Power consumption:	WV-CW244FE: 12 V DC, 265 mA (Camera)
		24 V AC 50 Hz, 3.0 W (Camera)
		24 V AC 50 Hz, 12.1 W (Heater unit)
		-18-