Pantech P2000 manual Installing/removing SIM card and battery, To charge your battery

Installing/removing SIM card and battery

1. Remove the battery cover from the unit. To fit the battery cover, put it on the guide rail and push up.

2. Insert the SIM card into the slot. The gold contacts of the SIM card should go against the metal contacts of the phone.

Put the contacts of the battery into the hole located at the bottom of the unit and then insert

and press the upper side of the battery until you hear the“click”. Make sure you align the gold contacts at the battery end with contacts on the phone. If the contacts at the battery are not properly aligned, damage could occur to the phone and the battery.

CorrectIncorrect

3. To remove the battery push the bottom of the battery to upwards (1)

and remove (2) the battery.

Push the SIM card in the arrow direction as shown.

To charge your battery

1. To charge, open the protective cover on the top right side and

connect the charger adapter.

The arrow on the charger

has to face the top of the phone.

Getting started

CorrectIncorrect

CorrectIncorrect

2. To remove the adapter connection press the adapter’s side buttons

(1)and pulling the adapter away (2).

18 19