ParaBody 250101 manual LOW Height

3/8 X 7-1/2” 51

32

56

50

38

18

38

43 LOW HEIGHT

3

FIGURE 7

STEP 7

•Loosely assemble two 4-1/2” PULLEYS (18) to the PRESS ARM (3) using two 3/8 X 7-1/2” BOLTS (51), four 3/8” WASHERS (38), four 3/8 X 1” SPACERS (32), and two 3/8” LOW HEIGHT LOCK NUTS (43) as shown in FIGURE 7. Once both PULLEYS are installed, you may securely tighten these two connections.

•Securely tighten the two SET SCREWS (50) and insert two 2” SQ. END CAPS (56) into open ends of the PRESS ARM (3) as shown in FIGURE 7.

8