ParaBody 889 manual Step, Tighten, Jamnut

31	9
23
	30
11	35 3/8 X 2”
SECURELY
TIGHTEN
JAMNUT!
FIGURE 11	3
STEP 11:

•Loop the 124” CABLE (11) around one 3-1/2” PULLEY (9) as shown in FIGURE 11.

•LOOSELY assemble the 3-1/2” PULLEY(9) to the 3/16 X 1-3/4 X 5-1/4” PLATES (23) using one 3/8 X 2” BOLT (35), two 3/8” WASHERS (30), and one 3/8” LOCK NUT (31). See FIGURE 11.

•SECURELY thread the end of the 124” CABLE (11) 3/4 of the way into into the threaded housing on the STACK BASE (3) and SECURELY tighten jam nut.

•SECURELY tighten the two 3/8 X 2” BOLTS (35) of the 3/16 X 1-3/4 X 5-1/4” PLATES (23).

12