ParaBody 889 manual Step

					STEP 5:
					• Insert two GUIDE RODS (6) into the STACK
					BASE (3) as shown in FIGURE 5. Lubricate
					the GUIDE RODS (6) with a silicon or teflon
					spray that is available at most hardware stores.
			15		• Slide two WEIGHT STACK CUSHIONS
					(26) down over the GUIDE RODS (6). See
					FIGURE 5.
					• Using EXTREME CARE slide twenty
			6		WEIGHT PLATES (25) down over the GUIDE
					RODS (6) with the key-hole facing as shown
					in FIGURE 5.
					• Carefully Slide the HEAD PLATE ASSEMBLY
					(36) down over the GUIDE RODS (6) onto the
	HEAD PLATE				weight stack as shown in FIGURE 5.
	ASSEMBLY 36
					• Slide two 13/16” SHAFT COLLARS (15)
		25			over the GUIDE RODS (6) as shown in
					FIGURE 5.
					• Apply one set of WEIGHT STACK LABELS -
					1-26 (28) to each WEIGHT PLATE (25) as
		28			shown in FIGURE 5.
				26
	3
			FIGURE 5
1/2	1/2	1/2	1/2	4	1/2	1/2
0	1	2	3		5	6
			7