ParaBody 889 manual LOW Height 32 3/8 X 2-3/4

FIGURE 7
	4
3/8” LOW HEIGHT 29
	5
22	32 3/8 X 2-3/4
STEP 7:

•SECURELY assemble the LAT BAR SUPPORT (5) to the TOP BOOM (4) using one 3/8 X 2-3/4” (32) and one 3/8” LOW HEIGHT LOCK NUT (29). See FIGURE 7.

•Slide two VINYL CAPS (22) over the LAT BAR SUPPORT (5) as shown in FIGURE 7.

FIGURE 8

31

33

4

Make sure CABLE	9	3/8 X 2-3/4” 32
is routed over bolt!

12

STEP 8:

•Route the 115-3/4” CABLE (12) through the TOP BOOM (4) as shown in FIGURE 8. (NOTE: It may be necessary to remove the 3/8 X 2-3/4” BOLT to ensure CABLE is routed over the TOP of the BOLT.)

•SECURELYassemble three 3-1/2” PULLEYS (9) into the slots of the TOPBOOM (4) using three 3/8 X 2-3/4” BOLTS (32), six 3/8” FLANGE SPACERS (33), and three 3/8” LOCK NUTS (31) as shown in FIGURE 8. (NOTE: Make sure the cable is routed over all the pulleys.)

•SECURELY retighten the removed 3/8 X 2-3/4” BOLT from the above step.

	1/2		1/2		1/2		1/2		1/2		1/2
0		1		2		3		4		5	6

9