ParaBody 889 manual Upright Frame Lower Cross Support LOW Height Locknut

	3/8 X 4” 38
	30
	1
	UPRIGHT FRAME
	LOWER CROSS SUPPORT
	3
	21
	2
		30
	3/8”	29
FIGURE 4	LOW HEIGHT
	LOCKNUT

STEP 4:

•NOTE: It may be necessary to loosen the 1/2 X 3-1/4” BOLTS of the LOWER CROSS SUPPORT connecting to the UPRIGHT FRAME before beginning STEP 4.

•SECURELY assemble the STACK BASE (3) and the UPRIGHT (1) to the LOWER CROSS SUPPORT using two 3/8 X 4” BOLTS (38), four 3/8” WASHERS (30), and two 3/8” LOW HEIGHT LOCK NUTS (29). See FIGURE 4.

•Pull back on the SPRING PIN (21) and CAREFULLY insert the ADJ. FOOT SUPPORT (2) into the STACK BASE (3) as shown in FIGURE4.

6