Paradyne 3174, 3172 manual Port Configuration Options 1 Factory Comments/Description, HDB3

Factory default configuration options are shown in boldface type in the following tables.

Table 1. DTE Interface Configuration Options

Option	Factory	Comments/Description
DTE Port:	Enab	Enables the use of the DTE Drop/Insert port.
	Disab
DTE Frame:	CRC4	Selects framing format.
	noCRC
DTE Coding:	AMI	Selects line coding format.
	HDB3
Extrn DLB:	Enab	Allows control of DLB on external contact
(External DTE		closure.
	Disab
Loopback)
Send Ones:	Enab	Sends all ones on channels allocated to the
		network E1 on LOS, LOF, or AIS.
	Disab

Table 2. Port Configuration Options (1 of 3)

Option	Factory	Comments/Description
Port Type:	E530	Selects the port type: EIA-530A, V.35, RS449,
		or X.21.
	V.35
	RS449
	X.21
Base Rate:	Nx64	Enables the port to either Nx56 or Nx64 rates.
	Nx56
Net DCLB:	Enab	Network-initiated DCLB, allows DCLB to be
		controlled by inband V.54 codes.
	Disab

5