Optional RTU Wall Placement
The Hotwire 5620 RTU is designed for tabletop placement. The RTU can also be mounted on a wall. To mount an RTU, you will need:
-Three
-Drill and 3/16″ drill bit for the molly bolts
-Screwdriver
A template with the dimensions for the three screws is provided. See RTU Hardware Template on page 12.
"Procedure
To mount the RTU:
1.Use a drill to install the plastic anchors (molly bolts).
2.Use a screwdriver to install the screws. Do not install the screws flush with the wall. Leave enough clearance to hang the RTU housing from the screws.
Wall
Fasteners
Hotwire
RTU
11
