Hotwire 6210, 6211, and 6381 User’s Guide

Important Safety Instructions

1.Read and follow all warning notices and instructions marked on the product or included in the manual.

2.Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these slots and openings must not be blocked or covered.

3.Do not allow anything to rest on the power cord and do not locate the product where persons will walk on the power cord.

4.Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous high voltage points or other risks. Refer all servicing to qualified service personnel.

5.General purpose cables are used with this product for connection to the network. Special cables, which may be required by the regulatory inspection authority for the installation site, are the responsibility of the customer. Use a UL Listed, CSA certified, minimum No. 24 AWG line cord for connection to the Digital Subscriber Line (DSL) network.

6.When installed in the final configuration, the product must comply with the applicable Safety Standards and regulatory requirements of the country in which it is installed. If necessary, consult with the appropriate regulatory agencies and inspection authorities to ensure compliance.

7.A rare phenomenon can create a voltage potential between the earth grounds of two or more buildings. If products installed in separate buildings are interconnected, the voltage potential may cause a hazardous condition. Consult a qualified electrical consultant to determine whether or not this phenomenon exists and, if necessary, implement corrective action prior to interconnecting the products.

8.Input power to this product must be provided by one of the following: (1) a UL Listed/CSA certified power source with a Class 2 or Limited Power Source (LPS) output for use in North America, or (2) a certified transformer, with a Safety Extra Low Voltage (SELV) output having a maximum of 240 VA available, for use in the country of installation.

9.In addition, since the equipment is to be used with telecommunications circuits, take the following precautions:

—Never install telephone wiring during a lightning storm.

—Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

—Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

—Use caution when installing or modifying telephone lines.

—Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

—Do not use the telephone to report a gas leak in the vicinity of the leak.

CE Marking

When the product is marked with the CE mark on the equipment label, a supporting Declaration of Conformity may be downloaded from the Paradyne World Wide Web site at www.paradyne.com. Select Support -> Technical Manuals -> Declarations of Conformity.

6210-A2-GB21-00

April 2004

3

Page 2 Page 4
Page 3
Image 3
Paradyne 6381, 6211, 6210 manual CE Marking
Page 2 Page 4

6210, 6211, 6381 specifications

Paradyne's family of products, particularly the 6381, 6211, and 6210 models, has made significant strides in the networking and telecommunications domain. These devices cater to a wide array of connectivity needs, offering robust solutions for both residential and commercial applications.

The Paradyne 6381 is known for its advanced DSL modem capabilities. Supporting high-speed data transmission over copper lines, it has become a reliable choice for Internet Service Providers looking to deliver stable and fast Internet services. One of its main features is its ability to aggregate multiple DSL connections, which enhances bandwidth and ensures a steady user experience, even during peak times. Its built-in diagnostic tools allow for efficient troubleshooting, making it easier for technicians to maintain and optimize network performance.

The 6211 model presents an interesting option for network managers with its multifunctional capabilities. It is designed to facilitate both voice and data over a single connection, leveraging Voice over IP (VoIP) technology. This integration simplifies network infrastructure, reducing overhead costs while maintaining service quality. The 6211 also supports Quality of Service (QoS) protocols, ensuring that voice traffic is prioritized, which results in clearer call quality and less disruption.

On the other hand, the Paradyne 6210 stands out for its versatility and compact design. This model is particularly well-suited for small to medium-sized businesses looking for a cost-effective solution without compromising on performance. It offers multiple Ethernet ports, enabling easy connection of various devices and seamless network expansion. The 6210 also features built-in security protocols to protect against unauthorized access, making it a secure option in today’s ever-evolving threat landscape.

All three models utilize advanced communication technologies, including the latest ADSL and VDSL standards, ensuring compatibility with existing infrastructure while providing the ability to scale up as needs grow. They also incorporate user-friendly interfaces for easier management, with support for remote configuration and monitoring, allowing network administrators to manage settings without being physically present.

In summary, Paradyne's 6381, 6211, and 6210 models are distinguished by their advanced features, reliability, and versatility. Each device caters to specific market needs, ensuring users can find a tailored solution for their networking challenges. These products embody Paradyne's commitment to delivering high-quality communication technology that keeps pace with the demands of modern connectivity.
Top Page Image Contents