Hotwire 6210, 6211, and 6381 User’s Guide
The Apply button will temporarily save this setting. To make the change permanent, click on Tools (at the top of the
page) and select System Commands. At the System Commands page, click on Save All.
4.6 Advanced
The CPE supports a host of advanced features. For basic router functionality, you don’t need to utilize these advanced
features. The features help with routing, security, port configuration, and plug and play capability.

4.6.1 UpnP

UPnP NAT and Firewall Traversal allow traffic to pass through the modem for applications using the UPnP protocol.
This feature requires one active DSL connection. In the presence of multiple DSL connections, select the one over
which the incoming traffic will be present, such as the default Internet connection.
To enable UPnP you must first have a WAN connection configured. Once a WAN connection is configured:
1. From the Home screen, click Advanced and under Advanced, select UPnP. This will bring up the screen shown
in Figure 4-13.
2. Enable UPnP and then select which connection will utilize UPnP. In Figure 4-13, the PPPoA connection is
enabled.
Figure 4-13. UPnP
The Apply button will temporarily save these settings. To make the change permanent, click on Tools (at the top of
the page) and select System Commands. At the System Commands page, click on Save All.
6210-A2-GB21-00 April 2004 33