Hotwire 6210, 6211, and 6381 User’s Guide
11. In the Internet Protocol (TCP/IP) Properties dialog box, click in the radio button labeled Use the
following IP address and type 192.168.1.x (where x is any number between 3 and 254) in the IP
Address field. Type 255.255.255.0 in the Subnet Mask field.
12. Click on twice to confirm and save your changes, and then close the Control Panel.
1. In the Windows task bar, click on the Start button, point to Settings, and then click on Control Panel.
2. Double-click on the Network and Dial-up Connections icon.
3. In the Network and Dial-up Connections window, right-click on the Network icon, and then select
Properties.
The Network Properties dialog box is displayed with a list of currently installed network components.
If the list includes Internet Protocol (TCP/IP), the protocol has already been enabled, in which case
you can skip to Step 11.
4. If Internet Protocol (TCP/IP) does not appear as an installed component, click on .
5. In the Select Network Component Type dialog box, select Protocol, and then click on .
6. Select Microsoft in the Manufacturers box.
7. Select Internet Protocol (TCP/IP) in the Network Protocols list, and then click on .
You may be prompted to install files from your Windows Me installation CD or other media. Follow the
instructions to install the files.
8. If prompted, click on to restart your computer with the new settings.
9. After restarting your PC, double-click on the Network and Dial-up Connections icon in the Control
Panel.
10. In Network and Dial-up Connections window, right-click on the Network icon, and then select
Properties.
11. In the Network Properties dialog box, select TCP/IP, and then click on .
12. In the TCP/IP Settings dialog box, click in the radio button labeled Use the following IP address and
type 192.168.1.x (where x is any number between 3 and 254) in the IP Address field. Type
255.255.255.0 in the Subnet Mask field.
13. Click on twice to confirm and save your changes, and then close th e Control Panel.
1. In the Windows task bar, click on the Start button, point to Settings, and then click on Control Panel.
2. Double-click on the Network icon.
The Network dialog box is displayed with a list of currently installed network components. If the list
includes TCP/IP, the protocol has already been enabled, in which case you can skip to Step 9.
3. If TCP/IP does not appear as an installed component, click on . The Select Network
Component Type dialog box appears.
4. Select Protocol, and then click .
The Select Network Protocol dialog box appears.
18 April 2004 6210-A2-GB21-00