Paradyne 8335, 8355, 8365, 8385 - page 39

3. Configuration

8335-A2-GB20-70 February 2003 3-17

For . . . Enter . . .

Latency The data stream path for the port (Default = Interleaved):

Fast – The data stream uses the fast path between the

line card and the endpoint.

Interleaved – The data stream uses the interleaved path

between the line card and the endpoint.

Behavior The training behavior (Default = Adaptive):

Adaptive – The line card will train up to the highest

operational rate less than or equal to the rates set in the

Downstream Maximum Speed and Upstream Maximum

Speed fields.

Fixed – The line card will train only at the rates set in the

Downstream Speed and Upstream Speed fields.

Downstream Speed The downstream DSL line rate (in 32kbps increments) the

card trains to if Behavior is set to Fixed:

DMT and ANSI: 32–8000kbps (Default = 8000 kbps).

G.lite: 64–3008kbps (Default = 1536 kbps).

Upstream Speed The upstream DSL line rate (in 32kbps increments) the

card trains to if Behavior is set to Fixed:

DMT and ANSI: 32–832kbps (Default = 832 kbps).

G.lite: 32–512kbps (Default = 64 kbps).

Maximum

Downstream Speed

The maximum downstream DSL line rate (in 32kbps

increments) the card can train to if Behavior is set to

Adaptive:

DMT and ANSI: 32–8000kbps (Default = 8000 kbps).

G.lite: 64–3008kbps (Default = 3008 kbps).

Minimum Downstream

Speed

The minimum downstream DSL line rate (in 32kbps

increments) the card can train to if Behavior is set to

Adaptive:

DMT and ANSI: 32–8000kbps (Default = 32 kbps).

G.lite: 64–3008kbps (Default = 64 kbps).

Maximum Upstream

Speed

The maximum upstream DSL line rate (in 32 kbps

increments) the card can train to if Behavior is set to

Adaptive:

DMT and ANSI: 32–832kbps (Default = 832 kbps). G.lite:

64–512kbps (Default = 5 12 kbps).

Minimum Upstream

Speed

The minimum upstream DSL line rate (in 32kbps

increments) the card can train to if Behavior is set to

Adaptive:

DMT and ANSI: 32–832kbps (Default = 32 kbps).

G.lite: 32–512kbps (Default = 64 kbps).

Target Margin The noise margin relative to a Bit Error Ratio of 10-7

required for a successful activation of the por t :

0–31 dB in 1 dB increments (Default = 4 dB).

Contents

Main Page Contents About This Guide 1 About the Hotwire ATM Line Cards 2 Menus and Screens ii 3 Configuration 4 Monitoring 5Diagnostics Page Page About This Guide Document Purpose and Intended Audience This version of the New Features for This Document Release Hotwire ATM Line Cards, Models 8335, 8355, 8365, and 8385, Users Guide Product-Related Documents Complete documentation for this product is available online at www.paradyne.com. Select . Section Description Document Number Document Title About the Hotwire ATM Line Cards Hotwire ATM Line Cards 1-2 Hotwire ATM Line Card Features DSL Features ATM Features Endpoint Support Features Partners Hotwire Connected Interoperability Program. 1-4 Network Configurations Figure 1-2. Router Endpoint Figure 1-1 shows the Hotwire ATM Line Card used to carry voice over DSL. SNMP Management Capabilities Management Information Base (MIB) Support SNMP Trap Support SNMP Traps Page Menus and Screens Menu and Screen Formats 2-2 Components of a Hotwire Screen Naming Conventions for Ports and Interfaces 2-4 General Navigation Keys Pop-Up Menu Navigation Keys Table 2-1. General Navigation Keys Keys Definition Table 2-2. Pop-Up Menu Navigation Keys Keys Definition User Login Screen (MCP) 2-6 Quick Card Select Screen Hotwire Management Communications Controller (MCC) Card, IP Conservative, Users Guide Page 2-8 Exiting from the System Manually Logging Out Automatically Logging Out Configuration Overview Saving and Restoring Configuration Options 3-2 Entering Card Information Configuration Card Card Info Page 3-4 Entering the Time and Date Setting Spectrum Management (Models 8355 and 8385) Page 3-6 Other Functions of the Card Menu Maintenance Procedures Configuration Card 3-8 Configuring the DSL Ports Configuration Physical Ports DSL Ports DSL Port Configuration Model8335 Page 3-10 DSL Port Configuration Model8355 Copy Model 8355 DSL Port Configurations 3-12 Page 3-14 Page 3-16 DSL Port Configuration Model8365 Page 3-18 DSL Port Configuration Model8385 3-20 Setting Spectrum Management (Models 8355 and 8385) Page 3-22 Page 3-24 Configuring the ATM Physical Layer (Models 8335, 8365, and 8385) Configuration Physical Ports ATM PHY La ye r Page 3-26 Configuring ATM Parameters Configuration ATM Swi tc h ATM Parameters Page 3-28 Configuring ATM Cross Connections Configuration ATM Swi tc h ATM Cross Connect Page 3-30 Page 3-32 Configuring ATM Traffic Profiles Configuration ATM Swi tc h ATM Traffic Prof Page 3-34 Page 3-36 3. Save the changes as prompted. Clearing Cross Connections Configuration ATM Swi tc h Clear X-Connects 3-38 Configuring Rate Shaping (Models 8335, 8365, 8385) Configuration ATM Swi tc h Rate Shaping Page Page NOTES: Page Page Page Monitoring What to Monitor Viewing Card Status and Information Table 4-1. Monitoring Card Options Hotwire Management Communications Controller (MCC) Card, IP Cons13.3((M)-9c-0. Re Viewing Physical Ports Status Page 4-6 Table 4-2. Monitoring Physical Ports (2 of 6) Table 4-2. Monitoring Physical Ports (3 of 6) 4-8 Table 4-2. Monitoring Physical Ports (4 of 6) Table 4-2. Monitoring Physical Ports (5 of 6) 4-10 Table 4-2. Monitoring Physical Ports (6 of 6) Monitoring ATM Activity Monitoring ATM Sw it ch 4-12 Table 4-3. Monitoring ATM Switch (2 of 7) Table 4-3. Monitoring ATM Switch (3 of 7) 4-14 Table 4-3. Monitoring ATM Switch (4 of 7) Configuration Configuration, Configuring ATM Traffic Profiles Table 4-3. Monitoring ATM Switch (5 of 7) Configuring ATM Traffic Profiles Configuration Configuration, 4-16 Table 4-3. Monitoring ATM Switch (6 of 7) Table 4-3. Monitoring ATM Switch (7 of 7) Monitoring SN Information Table 4-4. Monitoring SN Information 4-20 Front Panel LEDs Indicating . . . Diagnostics Self-Test Page Alarms Table 5-2. Monitoring Card Alarms (1 of 6) 5-6 Table 5-2. Monitoring Card Alarms (2 of 6) (Continued on next page) Table 5-2. Monitoring Card Alarms (3 of 6) (Continued) 5-8 Table 5-2. Monitoring Card Alarms (4 of 6) Table 5-2. Monitoring Card Alarms (5 of 6) (Continued on next page) 5-10 Table 5-2. Monitoring Card Alarms (6 of 6) (Continued) ATM Pin g Diagnostics ATM Pin g ATM P in g C onf ig 5-12 ATM Ping Summary Diagnostics ATM Pin g ATM Ping Summary 5-14 Table 5-4. Diagnostics ATM Ping Summary Loopback Test (Model 8385 Only) Diagnostics Line Loopback 5-16 Table 5-5. Diagnostics Loopback Test Page Maintenance Procedures 6-2 Clearing NVRAM Configuration Card NVRAM Clear Uploading and Downloading a Configuration Configuration Card NVRAM Cfg Loader 6-4 Uploading a Configuration Downloading a Configuration Configuration Loader Statistics Resetting the Card Configuration Card Card Reset Page Page Page A Menus Configuration Menu A-2 Monitoring Menu Applications Menu The Application branch is not used on this product. Diagnostics Menu Page B SNMP Traps Trap Managers Hotwire Management Communications Controller (MCC) Card, IP Conservative, Users Guide SNMP Traps B-2 Table B-1. SNMP Traps (2 of 6) Table B-1. SNMP Traps (3 of 6) B-4 Table B-1. SNMP Traps (4 of 6) Table B-1. SNMP Traps (5 of 6) B-6 C Connector Pin Assignments Model 8820 GranDSLAM Telco Connector Pinouts C-2 Model 8620 GranDSLAM Telco Connector Pinouts D Technical Specifications Table D-1. ATM Line Card Technical Specifications (1 of 2) Specifications Criteria* D-2 Table D-1. ATM Line Card Technical Specifications (2 of 2) Specifications Criteria* Index A B C IN-2 D E F G H K L M N O P Q R S T U V W