Paradyne 8335, 8355, 8365, 8385 3-30

3. Configuration

3-30 February 2003 8335-A2-GB20-70

Procedure

To configure ATM cross connections:

1. Select the interface to be changed (dsl1:1 through dsl16:1 on the

Model 8335, dsl1:1 through dsl12:1 on the Model 8365, or dsl1:1 through

dsl24:1 on the Model 8355 and Model 8385).

2. Select the Index number of the VC (Virtual Channel) you wish to modify, or 0

to add a new VC.

— Total Connections for this Interface shows the number of connections

defined for the interface.

— Available Connections displays the number of connections still available

for the card.

To scroll to the previous or next group of connections, type u (for Up) or

d (for Down) in the Index field.

3. Position the cursor in the field you wish to modify. Type the value you want and

press Enter.

For . . . Enter . . .

VPI The VPI (Virtual Path Identifier) of the connection, from

0to15.

VCI The VCI (Virtual Channel Identifier) of the connection from

32 to 255.

Profile Name (Models

8335 and 8385)

Tx Profile/Rx Profile

(Model 8355)

Dnstream Profile/

Upstream Profile

(Model 8365)

A default or user-defined ATM traffic profile. Default traffic

profiles include AUTOBAU D (Model 8335 only), IP MGT

(Model 8365 only), PACKET, and VOICE. See

Configuring ATM Traffic Profiles

on page3-32. Press

Ctrl-v for a list of valid downstream profiles.

For the Model8355, define the profile to be used for ATM

traffic both leaving (Tx or downstream) and entering (Rx

or upstream) the interface.

For the Model8365, define the profile to be used for both

the downstream and upstream connections.

Status Enable – To enable the connection.

Disable – To disable the connection.

Delete – To delete the connection.

For a connection that already exists, the system

displays one of:

Up – VPI/VCI is operational.

Down – VPI/VCI is not operational.

Contents

Main Page Contents About This Guide 1 About the Hotwire ATM Line Cards 2 Menus and Screens ii 3 Configuration 4 Monitoring 5Diagnostics Page Page About This Guide Document Purpose and Intended Audience This version of the New Features for This Document Release Hotwire ATM Line Cards, Models 8335, 8355, 8365, and 8385, Users Guide Product-Related Documents Complete documentation for this product is available online at www.paradyne.com. Select . Section Description Document Number Document Title About the Hotwire ATM Line Cards Hotwire ATM Line Cards 1-2 Hotwire ATM Line Card Features DSL Features ATM Features Endpoint Support Features Partners Hotwire Connected Interoperability Program. 1-4 Network Configurations Figure 1-2. Router Endpoint Figure 1-1 shows the Hotwire ATM Line Card used to carry voice over DSL. SNMP Management Capabilities Management Information Base (MIB) Support SNMP Trap Support SNMP Traps Page Menus and Screens Menu and Screen Formats 2-2 Components of a Hotwire Screen Naming Conventions for Ports and Interfaces 2-4 General Navigation Keys Pop-Up Menu Navigation Keys Table 2-1. General Navigation Keys Keys Definition Table 2-2. Pop-Up Menu Navigation Keys Keys Definition User Login Screen (MCP) 2-6 Quick Card Select Screen Hotwire Management Communications Controller (MCC) Card, IP Conservative, Users Guide Page 2-8 Exiting from the System Manually Logging Out Automatically Logging Out Configuration Overview Saving and Restoring Configuration Options 3-2 Entering Card Information Configuration Card Card Info Page 3-4 Entering the Time and Date Setting Spectrum Management (Models 8355 and 8385) Page 3-6 Other Functions of the Card Menu Maintenance Procedures Configuration Card 3-8 Configuring the DSL Ports Configuration Physical Ports DSL Ports DSL Port Configuration Model8335 Page 3-10 DSL Port Configuration Model8355 Copy Model 8355 DSL Port Configurations 3-12 Page 3-14 Page 3-16 DSL Port Configuration Model8365 Page 3-18 DSL Port Configuration Model8385 3-20 Setting Spectrum Management (Models 8355 and 8385) Page 3-22 Page 3-24 Configuring the ATM Physical Layer (Models 8335, 8365, and 8385) Configuration Physical Ports ATM PHY La ye r Page 3-26 Configuring ATM Parameters Configuration ATM Swi tc h ATM Parameters Page 3-28 Configuring ATM Cross Connections Configuration ATM Swi tc h ATM Cross Connect Page 3-30 Page 3-32 Configuring ATM Traffic Profiles Configuration ATM Swi tc h ATM Traffic Prof Page 3-34 Page 3-36 3. Save the changes as prompted. Clearing Cross Connections Configuration ATM Swi tc h Clear X-Connects 3-38 Configuring Rate Shaping (Models 8335, 8365, 8385) Configuration ATM Swi tc h Rate Shaping Page Page NOTES: Page Page Page Monitoring What to Monitor Viewing Card Status and Information Table 4-1. Monitoring Card Options Hotwire Management Communications Controller (MCC) Card, IP Cons13.3((M)-9c-0. Re Viewing Physical Ports Status Page 4-6 Table 4-2. Monitoring Physical Ports (2 of 6) Table 4-2. Monitoring Physical Ports (3 of 6) 4-8 Table 4-2. Monitoring Physical Ports (4 of 6) Table 4-2. Monitoring Physical Ports (5 of 6) 4-10 Table 4-2. Monitoring Physical Ports (6 of 6) Monitoring ATM Activity Monitoring ATM Sw it ch 4-12 Table 4-3. Monitoring ATM Switch (2 of 7) Table 4-3. Monitoring ATM Switch (3 of 7) 4-14 Table 4-3. Monitoring ATM Switch (4 of 7) Configuration Configuration, Configuring ATM Traffic Profiles Table 4-3. Monitoring ATM Switch (5 of 7) Configuring ATM Traffic Profiles Configuration Configuration, 4-16 Table 4-3. Monitoring ATM Switch (6 of 7) Table 4-3. Monitoring ATM Switch (7 of 7) Monitoring SN Information Table 4-4. Monitoring SN Information 4-20 Front Panel LEDs Indicating . . . Diagnostics Self-Test Page Alarms Table 5-2. Monitoring Card Alarms (1 of 6) 5-6 Table 5-2. Monitoring Card Alarms (2 of 6) (Continued on next page) Table 5-2. Monitoring Card Alarms (3 of 6) (Continued) 5-8 Table 5-2. Monitoring Card Alarms (4 of 6) Table 5-2. Monitoring Card Alarms (5 of 6) (Continued on next page) 5-10 Table 5-2. Monitoring Card Alarms (6 of 6) (Continued) ATM Pin g Diagnostics ATM Pin g ATM P in g C onf ig 5-12 ATM Ping Summary Diagnostics ATM Pin g ATM Ping Summary 5-14 Table 5-4. Diagnostics ATM Ping Summary Loopback Test (Model 8385 Only) Diagnostics Line Loopback 5-16 Table 5-5. Diagnostics Loopback Test Page Maintenance Procedures 6-2 Clearing NVRAM Configuration Card NVRAM Clear Uploading and Downloading a Configuration Configuration Card NVRAM Cfg Loader 6-4 Uploading a Configuration Downloading a Configuration Configuration Loader Statistics Resetting the Card Configuration Card Card Reset Page Page Page A Menus Configuration Menu A-2 Monitoring Menu Applications Menu The Application branch is not used on this product. Diagnostics Menu Page B SNMP Traps Trap Managers Hotwire Management Communications Controller (MCC) Card, IP Conservative, Users Guide SNMP Traps B-2 Table B-1. SNMP Traps (2 of 6) Table B-1. SNMP Traps (3 of 6) B-4 Table B-1. SNMP Traps (4 of 6) Table B-1. SNMP Traps (5 of 6) B-6 C Connector Pin Assignments Model 8820 GranDSLAM Telco Connector Pinouts C-2 Model 8620 GranDSLAM Telco Connector Pinouts D Technical Specifications Table D-1. ATM Line Card Technical Specifications (1 of 2) Specifications Criteria* D-2 Table D-1. ATM Line Card Technical Specifications (2 of 2) Specifications Criteria* Index A B C IN-2 D E F G H K L M N O P Q R S T U V W