Paradyne BSX8000-5, Broadband Services Switch BLC Management, Web Interface NMS, MIM-4000F

MIM-4000F

The MIM-4000F is a four-port fiber gigabit Ethernet interface connecting directly to the gigabit Ethernet switch in the BSX8000-5 uplink module.

MIM-2E1

Plug your E1 cable into one of the RJ45 E1 ports on the MIM-2E1 faceplate. The MIM-2E1 connects to an E1 network extender provider unit (ENE2000-P or, for loop bonding, ENE2020-P) via a standard E1 line.

Verify the connection: the Lnk (link) LED on the MIM-2E1 faceplate flashes green to indicate a network connection has been established.

MIM-2T1

Plug your T1 cable into one of the RJ45 T1 ports on the MIM-2T1 faceplate. The MIM-2T1 connects to a T1 network extender provider unit (TIM1500-12, TIM1500-24, TNE1500, or TNE1520) via a standard T1 line.

Verify the connection: the Lnk (link) LED on the MIM-2T1 faceplate flashes green to indicate a network connection has been established.

BLC Management

The BSX8000-5 uplink module provides BLC management capability via the Command Line Interface (CLI), Simple Network Management Protocol (SNMP), and the web-based Network Management System (NMS).

Web Interface (NMS)

The following are required for use of the NMS:

„Web Browser – Required for running NMS. Compatible web browsers include, but are not limited to, Microsoft Internet Explorer (version 6.0 or higher) and Netscape Navigator (version 6.0 or higher). NMS is optimized for use with Internet Explorer.

„Use your browser's default settings when running NMS. JavaScript must be enabled.

„Screen Resolution – 1024 x 768 pixels is the minimum resolution required for all NMS views to fit within the dimensions of most monitors and laptops. Lower screen resolutions (such as 800 x 600 pixels) may cause NMS screens to exceed the width or height of the screen. To verify screen resolution on a Windows system:

—Right click on your desktop

—Select Properties

—Click the Settings tab

—Adjust the Screen Resolution as needed

6 March 2005 BSX8-A2-GZ40-10