Paradyne Broadband Services Switch NMS Management Configuration, Parameter, Description

NMS Management Configuration

Use the Management Configuration screen to set the unit’s IP address and other management parameters.

Procedure

To configure management parameters:

1.From the home screen, click on the Management Config button. The Management Configuration screen appears.

2. Select or enter the following parameters:

Parameter	Description
IP Address	Specify the management IP address for the DSLAM.
Subnet Mask	Specify the subnet mask for the IP address.
Gateway	Specify the first-hop gateway address.
EtherType	Select the type of packets supported by your router.
	This is used only for backbone VLAN (Q in Q) traffic.
Inband MGMT	Check this box if you will use inband management
	(that is, you will allow the device to be contacted by
	ports other than the MGMT port)..
VLAN Id	Specify a VLAN identifier for inband management.
Priority	Specify a priority (0–7) for inband management traffic.

BSX8-A2-GZ40-10 March 2005 9