Paradyne SLV 9128, Paradyne FrameSaver Physical, General, Network, Configuration Option, Settings

General

Select General to configure a timeout period and duration for user-initiated loopbacks and pattern tests, a primary and secondary clock source for the system, and a system alarm relay.

General

Configuration Option	Settings	Default in [Bold]
Test Timeout	[Enable], Disable
Test Duration (min)	1 –120	[10]
Primary Clock Source	[Net1], DSX, Internal, DBM
Secondary Clock Source	Net1, DSX, [Internal], DBM
System Alarm Relay	Enable, [Disable]

Physical

Select Physical to configure the physical characteristics of each interface:

HNetwork

HData Ports

HISDN

Network

Select Network, then Physical to configure physical characteristics for the T1 network interface.

Network

Configuration Option	Settings	Default in [Bold]
Line Framing Format	D4, [ESF]
Line Coding Format	AMI, [B8ZS]
Line Build Out (LBO)	[0.0], –7.5, –15,	–22.5
Bit Stuffing	[62411], Disable
Transmit Timing	[System], Interface
Network Initiated LLB	[Enable], Disable
Network Initiated PLB	[Enable], Disable
Network Initiated DCLB	Disable, [V.54_&_ANSI]
ANSI Performance Report	Enable, [Disable]
Messages
Excessive Error Rate Threshold	[10E-4], 10E-5, 10E-6, 10E-7, 10E-8, 10E-9
Circuit Identifier	Text Field, [Clear]

6