Paradyne SLV 9128 technical manual Isdn Bri, Isdn Pri, Clear, Configuration Option, Settings

ISDN

Select ISDN, then Physical to configure physical characteristics for the ISDN interface if an ISDN DBM is installed.

The following table shows the configuration options for an ISDN BRI DBM.

ISDN BRI

Configuration Option	Settings	Default in [Bold]
Interface Status	Enable, [Disable]
Originate or Answer	[Originate], Answer
Service Profile ID 1 or 2 (SPID)	[Clear]	(3 –20 digits)
Local Phone Number 1 or 2	[Clear]	(up to 10 digits)

The following table shows the configuration options for an ISDN PRI DBM.

ISDN PRI

Configuration Option	Settings	Default in [Bold]
Interface Status	Enable, [Disable]
Originate or Answer	Originate, [Answer]
Switch Type	[NI-2], ATT_4ESS, ATT_5ESS
Local Phone Number	[Clear]	(up to 10 digits)
Line Framing Format	D4, [ESF]
Line Build Out (LBO)	[0.0], –7.5, –15, –22.5
Network Initiated LLB	[Enable], Disable
Network Initiated PLB	[Enable], Disable
ANSI Performance Report	Enable, [Disable]
Messages
Excessive Error Rate Threshold	[10E-4], 10E-5, 10E-6, 10E-7, 10E-8, 10E-9
Circuit Identifier	Text Field, [Clear]

8