Vertical Timing | Ricoh FV-L030B1 instruction

2.1.2Vertical Timing

2.1.2.1

Normal Full Scanning

(setting 10H: 1XX00XXX, 11H: XXX0X000)

1 H = 63.5556 μs, 29.9700 Hz at 30fps 1 H = 31.7778 μs, 59.9400 Hz at 60fps 1 H = 21.1852 μs, 89.9100 Hz at 90fps

525H One vertical (1V)

FVAL

31H494H31H

1

2

493

494

Video out

	31H				494H				31H
	31H				494H				31H

Vertical blanking
Vertical blanking				Video output

LVAL

DVAL

2.1.2.2

Partial Full Scanning

(setting 10H: 1XX01XXX, 11H: XXX0X000)

1 H = 63.5556 μs, 31.4685 Hz at 30fps 1 H = 31.7778 μs, 62.9370 Hz at 60fps 1 H = 21.1852 μs, 94.4055 Hz at 90fps

500H One vertical (1V)

FVAL

6H 494H6H

1

2

493

494

Video out

6H494H6H

VerticalVideo output blanking

LVAL

DVAL

※By transferring the blanking period pixels at a high rate, the frame rate of the partial full scanning can be increased compared to that of the normal full scanning.

	FVL030B1	6/32
	User’s Guide Rev. 1.01	6/32
	User’s Guide Rev. 1.01

Image 6

Ricoh FV-L030B1 manual Vertical Timing, Normal Full Scanning Setting 10H 1XX00XXX, 11H

Contents

VGA CCD FVL030B1 User’s Guide Rev Tables of Contents Connector Specifications Camera Link Connector PowerI/O Connector / OUT Normal Mode Setting 10H Horizontal Timing Normal Full Scanning Setting 10H 1XX00XXX, 11H Partial Full Scanning Setting 10H 1XX01XXX, 11HVertical Timing Partial Scanning Setting 10H 1XX01XXX, 11H FVL030B1 User’s Guide Rev Setting 10H 1XX01XXX, 11H2.4 1/4 Partial Scanning Variable Partial Scanning Setting 10H 1XX01XXX, 11H SUB Binning Mode Setting 10H Vertical Timing Binning Full Scanning Setting 10H 1XX10XXX, 11HSetting 10H 1XX11XXX, 11H Binning Partial Full Scanning Binning 1/2 Partial Scanning Binning 1/4 Partial Scanning Xclk Data Order on the Camera Link Output 1 Taps Transferring Image（1X1Y ） Pixel Transferring Image Normal Mode Frame ExposureElectric Shutter Pulse Width Trigger Mode Pulse Width Trigger Mode（VReset ） Pulse Width Trigger Mode NonReset Exposure Timing Edge Preset Trigger Mode Edge Preset Trigger Mode VReset Edge Preset Trigger Mode NonReset Reset Mode Communication Settings Communication MethodCommunication Format Name Descriptions 【Example Code】Reading the data from the command 00H Camera Control Command Camera Command List Eeprom 24/32 Descriptions of the Camera Control Commands Underline settings are the factory default settings 26/32 27/32 28/32 29/32 30/32 31/32 32/32