Paradyne Paradyne FrameSaver Data Ports, When Port Use is set to Synchronous Data on Port-2

Data Ports

Select Data Ports, then Physical to configure physical characteristics for the port connected to the DTE.

Data Ports

Configuration Option		Settings	Default in [Bold]
Port Status		[Enable], Disable
Port Use	(Port-2 only)	[Frame Relay], Synchronous Data

For Port-1 or when Port Use is set to Frame Relay on Port-2:

Max Port Rate (Kbps)	[1536], 2048
(Port-2 only)
Invert Transmit Clock	[Auto], Enable, Disable
Transmit Clock Source	[Internal], External
Monitor DTR	[Enable], Disable
Monitor RTS (Control)	[Enable], Disable
Port (DTE) Initiated Loopback	[Disable], Local, Both
When Port Use is set to Synchronous Data on Port-2:
Port Base Rate (Kbps)	[Nx64], Nx56
Invert Transmit Clock	[Auto], Enable, Disable
Transmit Clock Source	[Internal], External
Monitor DTR	[Enable], Disable
Monitor RTS (Control)	[Enable], Disable
Port (DTE) Initiated Loopback	[Disable], DTPLB, DCLB, Both
Invert Transmit and Receive Data	Enable, [Disable]
Action on Network Yellow Alarm	None, [Halt]
Network Initiated	[Disable], V.54, ANSI_FT1, V.54_&_ANSI
Data Channel Loopback

7